RDM0001/3_2 Page 20 of 70 © 2015 - 2017 Protec Fire Detection plc
11.6 New Zone in Alarm
If a new zone or a previously silenced zone goes into alarm, the panel will re-activate the
alarms and re-sound the internal buzzer.
11.7 Activating the Alarms Manually
Touch and hold Sound Alarms when logged in to evacuate the building.
Output group types will be activated as programmed but the Control and
Fire Link outputs WILL NOT be activated.
If the sound alarms input is set to operate a fire link output this will create a
design error.
To Next Page
Loading...
