RDM0001/3_2 Page 40 of 70 © 2015 - 2017 Protec Fire Detection plc
13.9 Disable / Enable
Touching Disable / Enable displays the disablement options. Disabling an input
device temporarily prevents it from generating a fire signal or a fault signal.
Disabling outputs temporarily prevents them from signalling that the system is
in a fire state. A disablement remains in place until the user cancels (normalises)
it.
13.10 Current Disablements
Touching Current Disablements displays the disablement summary.
To Next Page
Loading...
