RDM0001/3_2 Page 15 of 70 © 2015 - 2017 Protec Fire Detection plc
7.0 Disablement Indications
When a user has disabled a critical feature of the system it will display this on the LCD. The internal
buzzer will also pulse slowly.
The General Disablement indicator will be illuminated and is always accompanied by other
indicator(s) detailing the exact disablement.
In general, the buzzer will sound for disablements until the disablement is accepted (by touching the
Accept button). Further disablements activate the buzzer again.
The following sections give descriptions of each disablement indication
7.1 Alarms Disabled
Activation of outputs designated as ‘alarm’ outputs is prevented. The sounders will not
operate in the event of a fire.
7.2 Alarm Routing (Fire link) Disabled
Activation and faults on the alarm routing output are inhibited. The fire link will not activate in
the event of a fire.
7.3 Fire Protection Disabled
Activation and faults on the fire protection equipment output are inhibited. The fire
protection equipment output will not activate in the event of a fire.
To Next Page
Loading...
