PRÜFTECHNIK OPTALIGN smart RS5 BT User Manual

Horizontal shaft alignment
71
5.9.1 Establishing wireless communication
1. Switch the RS5 BT sensor on by pressing its On/Off push button switch.
2. Press
m to access the OPTALIGN smart computer measurement screen.
3. While in the “Measurement” screen, press
q then use f/g to
highlight the context menu item ‘Sensor selection’.
4. Press
e to confirm selection. The selection window appears.

PRÜFTECHNIK OPTALIGN smart RS5 BT Specifications

General

Brand	PRÜFTECHNIK
Model	OPTALIGN smart RS5 BT
Category	Laser Shaft Alignment Tools
Language	English