Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
134
Psion Teklogix 7530 Hand-Held Computer User Manual
5.8 SNMP (Simple Network Management Protocol) Setup
Simple Network Management Protocol (SNMP) is the protocol used to monitor and
manage devices attached to a TCP/IP network (providing they support SNMP).
SNMP uses Management Information Bases (MIBs) that define the variables an
SNMP Network Management Station can access. Each product has a defined set of
MIBs that determine how SNMP operates, the type of access allowed and so on.
All Teklogix products support the TEKLOGIX-GENERIC-MIB – a MIB that
defines some common features across Teklogix products. All devices also support
MIB-II, a management information base that defines the common features of
TCP/IP networks. The SNMP Agent software embedded in the 7530 product
supports SNMPv1 (RFC 1157).
• In the
Control Panel, choose the SNMP icon.
Figure 5.50 SNMP Icon
To Next Page
Loading...
