Psion Teklogix 7530 Hand-Held Computer User Manual99
Chapter 5: Configuration
Volume And Sound Properties
5.5.3 Volume And Sound Properties
Note: Sounds (wave files) cannot be reproduced on 7530 units. The conditions
under which 7530s emit sounds are tailored from within the application
installed on your unit.
• In the
Control Panel, choose the Volume & Sounds icon.
Figure 5.14 Choosing The Volume Icon
5.5.3.1 Volume Adjustments
Figure 5.15 Volume Settings
• Slide the volume button to the left to lower the beeper volume or to the right
to increase the beeper volume.
• Under the heading
‘Enable sounds for:’, enable (√) the conditions under which
you want the 7530 to emit a beep.
To Next Page
Loading...
