Q-See QT426 - Page 62

REMOTE SURVEILLANCE QT426 User Manual
59 | Page
g. After you enter the information click on the Test button (Green box in Fig 7-13) and wait until you see the OK
message in the bottom left hand corner of the screen.
h. Click the [APPLY] button and then the [EXIT] button at the bottom of the NETWORK screen and your DDNS
setup is complete.
Fig 7-13 myq-see
 DDNS Server: Select MYQ-SEE from the drop down menu.
 Username: The email address you entered on the myq-see site.
 Password: Enter the password you setup on the myq-see site.
 Host Domain: Enter the account name you setup on the myq-see site.