Interface 150821/A4 Page 91 of 110
3.1.5.51 BINning:LOWer:BIN
Instruction: BINning:LOWer:BIN{1-8}
Parameter: {?⏐<number> (NR3 mode)}
Return Value: {The low limit value of each BIN}
Function: Sets the low limit value of each bin. Value is +999.99 to -999.99%
3.1.5.52 BINning:LOWer:AUX
Instruction: BINning:LOWer:AUX
Parameter: {The low limit value (NR3 mode) of the secondary parameter}
Return Value: {The low limit value (NR3) of secondary parameter}
Function: Sets the AUX LO value for binning. (The low limit of parameter B)
3.1.5.53 BINning:NOMInal
Instruction: BINning:NOMInal
Parameter: {The nominal value (NR3 mode) of the primary parameter}
Return Value: {The nominal value (NR3) of primary parameter}
Function: Sets the NOMINAL value for binning. (The nominal value of parameter A)
3.1.5.54 BINning:STATe
Instruction: BINning:STATe
Parameter: {ON (1)⏐OFF (0)}
Return Value: {1⏐0}
Function: Set the Binning function: ON or OFF.
Description: ON (1) Binning is ON
OFF (0) Binning is OFF
3.1.5.55 BINning:RESUlt
Instruction: BINning:RESUlt
Parameter: none
Return Value: {Binning Result (+0 ~ +9)}
Function: Get the Binning Result: +0, +1 ~ +8, +9.
Description: +0 Binning is OFF or the sequence result is 0 (secondary parameter failed).
+1 ~ +8 Primary and Secondary parameter pass for limits set for specific bin.
+9 The secondary parameter passed, the primary parameter failed.
To Next Page
Loading...
Need help?
General