QuadTech 1730T - Interface; IEEE-488 Command Structure

Page 76 of 110 150821/A4 Interface
3.1.3 IEEE-488 Commands
Figure 3-3 illustrates the programming commands accepted by the IEEE-488 interface of the
1730T instrument. The commands are written in tabular format as a single reference to view all
the commands. The command format and examples are detailed in paragraphs 3.1.4 – 3.1.5.
Root
CALCulate FORMat
LIMit
LOWer
STATe
UPPer [DATA]
[DATA]
MATH EXPRession
NAME
STATe
PATH
DATA [DATA]
FETCh
FORMat [DATA]
INITiate CONTinuous
IMMediate
BEEPer CONDition
STATe
CATalog
CALibration CABLe
DISPlay [WINDow] [STATe]
TEXT1
TEXT2
PAGE
PAGE
ABORt
Continued on next page.
Figure 3-3a: IEEE-488 Commands