QuadTech 1730T - Interface; Trigger Delay, Source, and Binning Upper Limit Commands

Page 90 of 110 150821/A4 Interface
3.1.5.46 TRIGer:DELay
Instruction: TRIGer:DELay
Parameter: Trigger Delay Time
Unit: [MS⏐S], default is S
Return Value: {Trigger Delay Time} in <NR3> format
Function: Set or query the trigger delay time.
Range Values: 0 ~ 9999ms
3.1.5.47 TRIGer:[IMMediate]
Instruction: TRIGer:[IMMediate]
Parameter: None
Return Value: None
Function: Set the instrument to trigger immediately.
3.1.5.48 TRIGger:SOURce
Instruction: TRIGger:SOURce
Parameter: {BUS⏐EXTernal⏐⏐INTernal⏐MANual}
Return Value: {BUS⏐EXTernal⏐⏐INTernal⏐MANual}
Function: Set or query the trigger mode.
Description: BUS Bus trigger
EXTernal External trigger
INTernal Internal trigger
MANual Manual trigger
3.1.5.49 BINning:UPPer:BIN
Instruction: BINning:UPPer:BIN{1-8}
Parameter: {?⏐<number> (NR3 mode)}
Return Value: {The upper limit value of each BIN}
Function: Sets the upper limit value of each bin. Value is +999.99 to -999.99%
3.1.5.50 BINning:UPPer:AUX
Instruction: BINning:UPPer:AUX
Parameter: {The upper limit value (NR3 mode) of the secondary parameter}
Return Value: {The upper limit value (NR3) of secondary parameter}
Function: Sets the AUX HIGH value for binning. (The upper limit of parameter B)