QuadTech 1855 - IEEE-488 Interface Commands

Interface Page 57 of 76
3.2.3 IEEE-488 Commands
Figure 3-3 illustrates the programming commands accepted by the IEEE-488 interface of the
1855 instrument. The commands are written in tabular format as a single reference to view all
the commands. The command format and examples are detailed in paragraphs 3.2.4 – 3.2.5.
ABORt
CALCulate LIMit FORMat
BEEPer CONDition
FAIL?
LOWer
STATe
ONOFf
IMMediate
UPPer
DATA?
STATe
LCTest
DATA
STATe
DISPlay
NULL
SOURce
WVTest
VOLTage
DATA
CURRent
CONFigure FUNCtion
SPEed
RANGe AUTO
CHG Time
DWELl
MEASure STATe?
IR?
LC?
VMON?
Figure 3-3a: IEEE-488 Commands