Interface Page 61 of 76
3.2.5.4 CALC:LIM:BEEP:STAT
Instruction: CALC:LIM:BEEP:STAT
Parameter: {OFF⏐ON⏐0⏐1}
Return Value: {0⏐1}
Function: Set or query the status of the beeper.
Description: OFF (0) Beeper sound is set to OFF
ON (1) Beeper sound is set to ON
3.2.5.5 CALC:LIM:FAIL?
Instruction: CALC:LIM:FAIL?
Parameter: {0 (FAIL)⏐1 (PASS)}
Return Value: {0⏐1}
Function: Query the result of the Compare function.
Description: 0 FAIL result
1 PASSL result
3.2.5.6 CALC:LIM:LOW[:DATA]
Instruction: CALC:LIM:LOW[:DATA]
Parameter: {The lower limit value⏐MAX⏐MIN}
Return Value: The lower limit value, the format is <NR3> (Floating point)
Function: Set or query the lower limit value.
Description: MINimum 000.000kΩ
MAXimum 9.999E14
3.2.5.7 CALC:LIM:STAT
Instruction: CALC:LIM:STAT
Parameter: {OFF⏐ON⏐0⏐1}
Return Value: {0⏐1}
Function: Set or query the state of the Compare Function.
Description: 0 Compare Function is OFF
1 Compare Function is ON
3.2.5.8 CALC:LIM:UPP[:DATA]
Instruction: CALC:LIM:UPP[:DATA]
Parameter: {The upper limit value⏐MAX⏐MIN}
Return Value: The upper limit value, the format is <NR3> (Floating point)
Function: Set or query the upper limit value.
Description: MINimum 000.001kΩ
MAXimum 9.999E14
To Next Page
Loading...
