Page 8 of 76
Specifications (Continued)
General Features
Test Types: Automatic Sequence Test
Manual Step Test
Null: Correction for Lead Leakage
Monitored Voltage (Vm): 1.0V – 650V DC (Voltage across DUT)
Charge Time: 0 – 999seconds in 1s/10s increments <100s; 100s increments >100s
Delay Time: 0.2 – 999seconds in 0.1s increments <100s; 10s increments>100s
Discharge: 65 Watt Discharge Circuit
Trigger: Delay: 0 – 9.995 seconds in 0.1s increments
Edge: Falling or Rising
Measurement Mode: Continuous or Trigger (INT, EXT or Manual)
Measurement Rate: Fast: 18 measurements/second
Medium: 14 measurements/second
Slow: 7 measurements/second
Ranging: Automatic or Hold
Averaging: 1-8 measurements
Compare: Set Upper & Lower Limits for LC and IR Tests
Display: 240 x 64 LCD Graphic display
Indication: Audible alarm programmable HI, LOW or OFF for Pass or Fail
Standard Interface: RS232
Optional Interfaces: IEEE-488 & Handler
Connectors: 1 BNC terminal: Input
2 Banana terminals: HV (+), HV (-)
1 Banana Socket: Chassis Ground
Front Panel Lockout: Keypad Lock
To Next Page
Loading...
