71
Weather Scanning
Note: The PRO-651 supports entry of Extended
SAME codes, which can include numbers and
letters. The text entry mode is used to enter both
numerical SAME codes and extended SAME
codes. To enter a numerical SAME code, simply
precede each number in the SAME code with
“1.” For example, to enter SAME code 048113,
press 10 14 18 11 11 13.
8. Scroll to the
Event: field. Note the current
default of ***, which will allow all messages
for the specified SAME location code. We
recommend that you leave the event code
with *** to receive all alerts. A list of event
codes can be found at www.weather.gov.
9. Scroll to Tag: and press u.
10. Input a tag name that corresponds with the
SAME location code that you have entered.
See “Appendix C: Text Entry and QuickText” on
page 125 for information on entering text.
11. Scroll to Alarm:. You can specify different
alarm sounds for this SAME entry. We
recommend that you use the default setting
here for general purpose weather alerting.
12. Scroll to Lockout:. Default is off. Lockout is
a special purpose parameter that can be used
to lock out individual event or area codes. We
recommend that you leave Lockout set to
off for general purpose weather alerting.
13. When you have finished editing your SAME
entry, press the Save softkey to store the
data.
14. Press the Save softkey again to save all
SAME changes and return to the Weather
mode.
To Next Page
Loading...
