Radyne ComStream SFC6400A - Page 133

Appendix C SFC6400A/SFC1450A Synthesized Frequency Upconverter
C-4 TM106 – Rev. 1.1
radConverterCarrierStatus OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows status of the carrier, on or off"
::= { radConverterStatus 1 }
radConverterSystemStatus OBJECT-TYPE
SYNTAX INTEGER {
standby(1),
online(2),
faulted(3),
setup(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows operating status of the converter"
::= { radConverterStatus 2 }
radConverterSwitchPresentStatus OBJECT-TYPE
SYNTAX INTEGER {
not_present(1),
present(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows switch status"
::= { radConverterStatus 3 }
radConverterConfiguration OBJECT-TYPE
SYNTAX INTEGER {
single_converter(1),
primary_1f1_converter(2),
backup_1f1_converter(3),
primary_1fn_converter(4),
backup_1fn_converter(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows converter configuration"
::= { radConverterStatus 4 }
radConverterType OBJECT-TYPE
SYNTAX INTEGER {
down(1),
up(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows converter type"
::= { radConverterStatus 5 }
radConverterBand OBJECT-TYPE