Radyne ComStream SFC6400A - Page 134

SFC6400A/SFC1450A Synthesized Frequency Upconverter Appendix C
TM106 – Rev. 1.1 C-5
SYNTAX INTEGER {
c_band(1),
ku_band(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows converter band"
::= { radConverterStatus 6 }
radConverterFrequencyType OBJECT-TYPE
SYNTAX INTEGER {
freq_70mhz(1),
freq_140mhz(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows converter frequency type"
::= { radConverterStatus 7 }
radConverterReferenceType OBJECT-TYPE
SYNTAX INTEGER {
internal(1),
external(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows converter reference type"
::= { radConverterStatus 8 }
radConverterMajorAlarmStatus OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this
to the value '00000000'B
Bit 0 = LO Fault
Bit 1 = Signal Fault
Bit 2-7 = Spares
0 = Pass, 1 = Fail"
::= { radConverterStatus 9 }
radConverterMinorAlarmStatus OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit field. On startup, the agent initializes this to
the value '00000000'B
Bit 0 = RF Dtect Fault
Bit 1 = IF Dtect Fault
Bit 2-7 = Spares
0 = Pass, 1 = Fail"
::= { radConverterStatus 10 }
radConverterLatchedMajorAlarmStatus OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-only