Appendix C SFC6400A/SFC1450A Synthesized Frequency Upconverter
C-8 TM106 – Rev. 1.1
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Controls the Prime converter compensation, ENABLE/DISABLE."
::= { radConverterSwitchNVStatus 6 }
radConverterSwitchCompensation OBJECT-TYPE
SYNTAX INTEGER (-50..+50)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Prime converter compensation of -5.0 dB to +5.0 dB (Implied decimal point).
Offsets the gain of the Backup unit to account for variations in loss
through the system.
This allows the user to ensure that the signal path of a particular Prime
Converter maintains the same output power when backed up."
::= { radConverterSwitchNVStatus 7 }
radConverterSwitchFaultDelay OBJECT-TYPE
SYNTAX INTEGER (50..10000 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the delay between the time a Fault occurs in a Prime unit and the
time it is acknowledged by the Backup. This only used in automatic backup
modes."
::= { radConverterSwitchNVStatus 8 }
radConverterSwitchNoFaultDelay OBJECT-TYPE
SYNTAX INTEGER (50..10000 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the delay between the time a Fault goes away in a Prime unit and
the time it is acknowledged as gone by the Backup. This only used in
automatic backup modes. Not yet implemented."
::= { radConverterSwitchNVStatus 9 }
radConverterSwitchMajorAlarmMask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Major Alarm mask:
Bit 0 = RelayFault
Bit 1 = Backup Fault
Bit 2 = NoBackup
Bit 3 = PollingFault
Bit 4-7 = Spares
0 = Mask, 1 = Allow"
::= { radConverterSwitchNVStatus 10 }
radConverterSwitchMinorAlarmMask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
To Next Page
Loading...