Radyne ComStream SFC6400A - Page 142

SFC6400A/SFC1450A Synthesized Frequency Upconverter Appendix C
TM106 – Rev. 1.1 C-13
ascii(1),
rllp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects remote port protocol."
::= { radConverterCommonNVStatus 5 }
radConverterCommonRemoteAddress OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remote port address, 1 through 255."
::= { radConverterCommonNVStatus 6 }
radConverterCommonRemoteBaudRate OBJECT-TYPE
SYNTAX INTEGER {
baud_2400(1),
baud_9600(2),
baud_19200(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects remote port Baud Rate."
::= { radConverterCommonNVStatus 7 }
radConverterCommonRemoteLineControl OBJECT-TYPE
SYNTAX INTEGER {
rs232(1),
rs485(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Selects RS232 or RS485."
::= { radConverterCommonNVStatus 8 }
radConverterCommonRemoteEchoMode OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets Echo mode to on or off. Valid only for ASCII protocol remote
serial interface"
::= { radConverterCommonNVStatus 9 }
radConverterCommonMajorAlarmMask OBJECT-TYPE
SYNTAX AlarmByteType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Major Alarm mask:
Bit 0 = CPLD test fault
Bit 1 = FPGA test fault
Bit 2 = Eeprom test fault