Table of Contents SFC6400A/SFC1450A Synthesized Frequency Upconverter
viii TM106 – Rev. 1.1
4.2.4 Monitor Menu Options and Parameters _______________________________ 4-8
4.2.5 Alarms Menu Options and Parameters ______________________________ 4-10
4.2.6 System Menu Options and Parameters ______________________________ 4-12
4.2.7 Test Menu Options and Parameters_________________________________ 4-16
4.3 Examples: Changing Parameters from the Front Panel ___________________ 4-20
4.4 Remote Port User Interfaces ________________________________________ 4-22
4.4.1 ASCII Serial Protocol_____________________________________________ 4-23
4.4.1.1 ASCII Command Structure ______________________________________ 4-23
4.4.2 RLLP Serial Protocol_____________________________________________ 4-23
4.4.2.1 RLLP Protocol Structure ________________________________________ 4-23
4.4.2.2 RLLP Protocol Wrapper_________________________________________ 4-24
4.4.2.3 Frame Description and Bus Handshaking___________________________ 4-25
4.4.2.4 Global Response Operational Codes ______________________________ 4-27
4.4.2.5 Collision Avoidance ____________________________________________ 4-28
4.4.2.6 Software Compatibility __________________________________________ 4-29
4.4.2.7 RLLP Summary_______________________________________________ 4-30
4.5 Terminal Port User Interface ________________________________________ 4-31
4.5.1 Terminal Main Menu _____________________________________________ 4-31
4.5.2 Terminal Converter Controls Menu__________________________________ 4-32
4.5.3 Terminal Switch Controls Menu ____________________________________ 4-32
4.5.4 Terminal Alarm Status & Masks Menu _______________________________ 4-33
4.5.5 Terminal Monitor Status Menu _____________________________________ 4-33
4.5.6 Terminal Test Controls Menu ______________________________________ 4-34
4.5.7 SNMP Controls Menu ____________________________________________ 4-34
4.5.8 Terminal Event Buffer Menu _______________________________________ 4-35
4.6 Ethernet Port User Interface ________________________________________ 4-36
4.6.1 Ethernet Port Configuration________________________________________ 4-36
4.6.1.1 Connecting the Terminal ________________________________________ 4-36
4.6.1.2 SNMP Option _________________________________________________ 4-37
4.6.2 Network Configuration____________________________________________ 4-37
4.6.2.1 Terminal Screens______________________________________________ 4-37
4.6.2.2 Logging on and Passwords ______________________________________ 4-37
4.6.2.3 Exiting SNMP Configuration______________________________________ 4-39
4.6.2.4 Logging On___________________________________________________ 4-39
To Next Page
Loading...