RaiseTouch User Manual Date:03/03/2020
- 29 / 80 -
www.raise3d.com
(2) Network
The Mac Address
WLAN MAC Address
(3) Steps Per Unit
Steps Per Unit is the number of signals that the stepping motor receives if it moves 1 mm forward. The
unit is step.
For example, if the X Step Per Unit is 80, it means that the stepping motor that controls the X axis to
move forward by 1 mm requires receiving 80 signals, that is ,80 steps.
At the same, Users can manually set the number of steps of the stepping motor which controls Y and Z
axes as well as E extruder, if the stepping motor advances 1 mm.
Steps Per Unit
To Next Page
Loading...
