R&S EM510 - Page 84

EM510 OUTPut Subsystem
4065.7763.32-01.00 5.48
. :BYTAux
. . [:STATe] <numeric_value>
Sets the 8 AUX bits by a single byte command.
Parameters:
<numeric_value> value of the AUX bytes (0 to 255, #H00 to #HFF or #B0
to #B11111111)
*RST state:
0
Example:
OUTPut : BYTAux 7
. :BYTAux
. . [:STATe]?
Query about the 8 AUX bits by a single byte command.
Parameters:
none
Result:
Depending on the settings by the FORMat : SREGister command, the contents of the register are
transferred decimally, binary or hexadecimally in ASCII code.
Example:
OUTPut : BYTAux?  7
. :FILTer: MODE OFF | NOTCh | NR | BP
This switch sets the audio filter mode.
Parameters:
OFF no filter function
NOTCh automatic elimination of interference signals
NR noise reduction filter
BP bandpass filter 300 Hz to 3.3 kHz
*RST state:
OFF
Example:
OUTPut:FILTer:MODE NOTCH