R&S EM510 - Page 90

EM510 OUTPut Subsystem
4065.7763.32-01.00 5.54
. :VIDeo:FREQuency <numeric_value>|MINimum|MAXimum
Setting the center frequency of the analog IF output. This command is only effective if the video mode
was set on IF.
Parameters:
<numeric_value> frequency value
MINimum|MAXimum sets the lowest/highest center frequency
*RST state:
10700000
Example:
OUTPut:VIDeo:FREQuency 15 MHz
. : VIDeo:FREQuency? [MINimum|MAXimum]
Query about the video mode settings.
Parameters:
none query about the currently set center frequency
MINimum|MAXimum query about the lowest/highest center frequency
Result:
center frequency in Hz
Example:
OUTPut:VIDeo:FREQuency?  15000000