9
E-02
Never use the product if the power cable is 9.
damaged. Check the power cable on a regular
basis to ensure that it is in proper operating
condition. By taking appropriate safety
measures and carefully laying the power cable,
ensure that the cable cannot be damaged and
that no one can be hurt by e.g. tripping over the
cable or suffering an electric shock.
The product may be operated only from TN/TT 10.
supply networks fused with max. 16 A (higher
fuse only after consulting with the Rohde &
Schwarz group of companies).
Do not insert the plug into sockets that are 11.
dusty or dirty. Insert the plug fi rmly and all the
way into the socket. Otherwise, this can result
in sparks, fi re and/or injuries.
Do not overload any sockets, extension cords 12.
or connector strips; doing so can cause fi re or
electric shocks.
For measurements in circuits with voltages 13.
Vrms > 30 V, suitable measures (e.g. appropriate
measuring equipment, fusing, current limiting,
electrical separation, insulation) should be
taken to avoid any hazards.
Ensure that the connections with information 14.
technology equipment comply with IEC 950/EN
60950.
GalaxyE_v1-10_3.indd 9GalaxyE_v1-10_3.indd 9 08.04.2009 15:21:3708.04.2009 15:21:37
To Next Page
Loading...
Need help?
General
