Ratio Computers iDive Color - Page 46

46
WARNING: This manual DOES NOT replace an adequate diving training !
If the chosen Algorithm is VPM:
R0:
sets the Critical Bubble Radius’ value.
It is possible to set R0 from 0.4 to 1.0
ATTENTION: To change the Critical Bubble Radius’ value a suitable theoretical
knowledge is needed.
DO NOT CHANGE THE CRITICAL BUBBLE RADIUS WITHOUT
HAVING RECEIVED A SUITABLE TRAINING.
The RATIO iDive Color is not responsible for damages to people or objects due to a
wrong setting of such parametres.
For suggested protection levels refer to the previous pages of this manual.
Do you know what?:
If you have any doubts on your device’s setting, you can set the company’s parametres from the menu DEFAULT
Do you know what?:
Generally speaking, the increasing of the R0 involves your computer’s conservatism increase.
Do you know what?:
With the RATIO iDive Color it is possible to change the value R0 while diving, to manage possible emergencies.
For iDive Color Tech+ only
clockwise
counter-
clockwise
Enter
Back
b
C
A
D
DIVE
SET
clockwise
or
+
Use B and D to select the setting, use C to enter the
setting you want to change.
(Once you selected the setting with C)
Use B and D to change the value of the setting and press
C to conrm the changes.
counter-
clockwise
or
-
Enter
or
Conrm
Back
b
C
A
D
DIVE SET
CONSERV
RØ: 0,50