Ratio Computers iDive Color - PLANNER (NDL Non Decompression Limit)

49
WARNING: This manual DOES NOT replace an adequate diving training !
PLANNER (NDL Non Decompression Limit)
To navigate the menu follow the instructions in the picture on the left.
The RATIO iDive Color integrates a complete planner for square dives for both BUL & VPM
Attention: To modify the dive parametres set the device as desired entering the
menu DIVE SET and the menu MIX
DEPTH: Set the dive’s maximum depth.
TIME: Set the desired bottom time.
EVALUATE: Select Evaluate and press D to process
Do you know what?: You can keep pressed the buttons C or D to change the iDive Color data more rapidly.
Evaluate: it starts the simulation (wait until the word “processing” disappears)
If the dive is within the safety parametres:
NDL: Remaining non decompression time (after the time you have set).
CNS: % of accumulated CNS.
OTU: % of accumulated OTU.
MIX QTY: Mix value expressed in litres which is presumably needed for the
dive.
ATTENTION: The gas used quantity is purely approximate and referred to a standard use.
Take into consideration the information given by your diver certification agency to about the
quantity of gas to be used.
clockwise
counter-
clockwise
Enter
Back
b
C
A
D
PLANNER
clockwise
or
+
Use B and D to select the setting, use C to enter the
setting you want to change.
(Once you selected the setting with C)
Use B and D to change the value of the setting and press
C to conrm the changes.
counter-
clockwise
or
-
Enter
or
Conrm
Back
b
C
A
D
PLANNER
DEPTH
18
clockwise
or
+
counter-
clockwise
or
-
Enter
or
Conrm
Back
b
C
A
D
PLANNER
NDL
CNS
OTU
MIX
DPT TIM18 25:
28:
0%
6
1400L