Rauch AXIS H EMC Series - Page 12

AXIS-H EMC/AXIS-H EMC+W
Layout and components
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page 2
of 3
27.10.2014
Chapter 210
2. Drive and agitator:
Legend:
1 Agitator head
a. Agitator head, left-hand side 4087002
b. Agitator head, right-hand side 4087003
2 Eccentric cam with electric motor
a. Eccentric cam 2056830
b. Agitator motor 3087356 => new 2058051
c. Load relay (see figure 5) 2056831
3 Hydraulic block, complete (see chapter “Hydraulic system”)
4 Gearbox (please refer to figure 2)
a. Gearbox, left-hand side (without motor) 4087272
b. Gearbox, right-hand side (without motor) 4087273
5 Disc speed sensor 2056835
6 Pressure sensor, 250 bar 2057097
7 Return flow sensor, 40 bar 2057096
8 Oil motor (see figure 2)
a. AXIS-H 30.1 EMC 11 cm
3
i. Left-hand side 3087424
ii. Right-hand side 3087425
b. AXIS-H 50.1 EMC 15 cm
3
i. Left-hand side 3087368
ii. Right-hand side 3087369
9 Hydraulic connections (see chapter “Hydraulic system”)
3
2
1
4
5
6
8
9
7
Figure 3: Complete drive
Figure 4: Spreading disc drive
4
8