AXIS-H EMC/AXIS-H EMC+W
Layout and components
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page
3
of
3
27.10.2014
Chapter 210
3. Drop point and metering slides
The drop point can be activated separately for each side. This enables different
settings for boundary or section spreading. The drop point actuators communicate
with the implement ECU via a LIN-BUS system.
The metering slides are activated depending on the application rate and forward
speed (= mass flow-rate). Activation is serial; the actuators feature integrated
position determination.
Legend:
1 Actuator drop point 2056487
2 Actuator metering slide 2057153
3 Load relay (High-side) 2056831
1
2
Figure 6: Drop point adjustment
1
2
Figure 5: Drop point and metering slides
3
To Next Page
Loading...
