Instructions for Use RAUMEDIC
MPR2 logO
Manufacturer: zwo-400EN
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany Rev. 9 2020-09-22
Page 34 of 99
Data is stored on th
e device. The user has the
option of backing these up before deletion (Select
No). If Yes is selected, the data are irrevocably
The deletion process lasts for a short period.
After data deletion, alarm limit selection is carried
out.
Specification of the site of measurement and the
possibility of zeroing, in case a pressure sensor is
connected.
Patient monitoring. The memory mode "No storing"
is indicated in the status line by the symbol
.
Even in memory mode “No storage“ trend display
for up to 8 hours is possible. Beyond this period,
older data are overwritten.
This document is for information only
To Next Page
Loading...