EasyManua.ls Logo

Raven AutoBoom UltraGlide XT - Chapter 2 Introduction; Preparing for Installation

Default Icon
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER
2
Manual No. 016-0171-122 Rev. E 3
CHAPTER 2
INTRODUCTION
Congratulations on your purchase of the Raven AutoBoom system! This system is designed to provide automated
boom height adjustment for agricultural equipment.This manual applies to the machines listed below.
MAKE: AGCO RoGator
YEAR: 2009
MODEL: 884, SS884, 1084, 1084C, SS1084, SSC1084, and 1286C
YEAR: 2010-2011
MODEL: 984, 984H, 994, 994H, 1184, 1184H, 1194, 1194H, 1386, and 1396
YEAR: 2012 & Newer
MODEL: RG900, RG900B, RG1100, RG1100B, RG1300, and RG1300B
FIGURE 1. AGCO RoGator RG1100
PREPARING FOR INSTALLATION
Before installing AutoBoom:
Park the machine on dry, clean, and level land.
Leave the machine off during the installation process.
Read the instructions in this manual as you complete the installation process.

Table of Contents

Related product manuals