Raven AutoBoom UltraGlide XT - Model Year 2010-2011 - 9 X4(H), 11 X4(H), 13 X6 Series Node and Harness Installation; Install the Node and Node Harness

CHAPTER 5
50 Viper Pro Installation & Operation Manual
MODEL YEAR 2010-2011 - 9X4(H), 11X4(H), 13X6 SERIES NODE AND
HARNESS INSTALLATION
INSTALL THE NODE AND NODE HARNESS
FIGURE 9. Node Mounting Location
1. Locate the node box on the right side of the machine and remove the cover.
FIGURE 10. Bulkhead Plug Location
2. Remove the bulkhead plug.
NOTE: Keep the bulkhead washer and lock nut for use later in this procedure.
AUTOBOOM TIP
CONTROL
Connection
Bulkhead Plug