5
P/N 016-5030-020 Rev. D 95
ENVIZIO PRO AND CRUIZER II CONSOLES CALIBRATION AND OPERATION
FIGURE 39. Advanced Setup #1 and Advanced Setup #2 Screens
• Current Compensation - Used only with certain non-steering ready machines. This feature is automatically
enabled or disabled during the calibration process and cannot be modified.
• Anti-Oscillation - This feature is only used with articulated machines and should not be enabled with any
other type of machine. Anti-Oscillation automatically turns on when an articulated machine is selected during
the machine configuration stage of the SmarTrax MD setup. Enabling this feature with any machine that is not
articulated may degrade the system performance.
SYSTEM DIAGNOSTICS SCREEN
The System Diagnostics screen contains the PWM values and system input diagnostic tools.
FIGURE 40. SmarTrax MD Settings and System Diagnostics Screen
• Average Speed - Average vehicle speed over the last hour while SmarTrax MD has been running.
• Average - Average distance from the desired guidance path or line during the last hour while SmarTrax MD
has been running.
• 1 Inch, 2 Inch, and 4 Inch - The percentage of time the machine has been within the distance of the guide line
during the last hour. Press Reset to set the fields to zero.
NOTE: The error percentages are always displayed in inches, regardless of the Display Unit selection. The
equivalent metric values are 5 cm, 10 cm, and 20 cm. On non-RTK systems, the values are 2”, 4”, and
8”.
To Next Page
Loading...