CHAPTER 3
16 SmarTrax™ MD Calibration & Operation Manual
SMARTRAX MD TERMS OF USE
FIGURE 7. Operator Liability Warning Screen
Read and accept the Operator Liability Warning. If the operator does not accept liability, the SmarTrax MD system
will disable and cannot be re-engaged until the liability warning is accepted. The Operator Liability Warning screen
will appear each time the Viper 4 is turned on or rebooted.
MACHINE CONFIGURATION
SET UP MACHINE PROFILE(S) - OPTIONAL
FIGURE 8. Machine Configuration Menu
1. Select one of the Profile options from the bottom of the Machine Type list.
2. Select Next.
3. Select New, Load, or Reset.
To Next Page
Loading...