4
P/N 016-5030-020 Rev. D 43
VIPER PRO CALIBRATION AND OPERATION
FIGURE 2. GPS Comm Port Setup Screen
4. Adjust the GPS settings to match the settings shown in Figure 1 above.
5. Select OK.
MACHINE CONFIGURATION
CALIBRATION WARNING
FIGURE 3. SmarTrax Warning Screen
NOTE: The screen above should only appear the first time SmarTrax MD is accessed or if default settings
have been restored. Select Yes to continue.
If this prompt continues to appear and the default settings have not been restored, contact your local
Raven dealer for assistance.
To Next Page
Loading...