CHAPTER 4
48 SmarTrax™ MD Calibration & Operation Manual
1. To determine the machine’s wheel base, measure the distance from the center of the machine’s front axle to the
center of the rear axle.
NOTE: For articulated machines, measure from the center of the front tire to the center of the rear tire on
both sides of the machine. Add the values together and divide the number by two to find the
average.
FIGURE 10. Articulated Machine Measurements
NOTICE
The Wheel Base, Antenna Position, and Antenna
Height values are critical to the operation of the
SmarTrax MD system. Measure these dimensions
accurately to ensure optimal SmarTrax MD
system performance!
WHEEL BASE
MEASUREMENT
ANTENNA FORE/AFT
MEASUREMENT
ANTENNA
HEIGHT
MEASUREMENT
WHEEL BASE
MEASUREMENT
ANTENNA FORE/AFT
MEASUREMENT
ANTENNA
HEIGHT
MEASUREMENT
To Next Page
Loading...