CHAPTER 5
76 SmarTrax™ MD Calibration & Operation Manual
FIGURE 6. Machine Type Screen
7. Select the specific machine type from the Machine Type list. If the specific machine is not listed, choose the
profile that best fits the machine:
NOTE: Cruizer II only - If the Machine Type list is not populated fully or at all, press the Previous (left) arrow
to reload the screen.
•SP Sprayer RBoom - Self-propelled sprayer with a rear boom
• FS Tractor - Front-steered tractor
•Articulated
•Track
• Rear Steered - Rear-steered machine
•Swather
NOTE: The Machine Test option should only be selected if calibration problems are encountered. Contact
your local Raven dealer for assistance with using the Machine Test option.
8. Select Next.
FIGURE 7. Steering Control Driving Device Selection Screen
NOTE: The steering control device selection screen will be displayed only when a SmarTrax node is detected
in the system.
9. Select SmarTrax MD in the Control Device drop-down field.
To Next Page
Loading...