5
P/N 016-5030-020 Rev. D 83
ENVIZIO PRO AND CRUIZER II CONSOLES CALIBRATION AND OPERATION
4. Select Next.
FIGURE 18. 3D Calibration Screen
5. Select Start Calibration. The following screen will appear:
FIGURE 19. Calibration in Progress Screen
NOTE: The calibration may take a few minutes to complete.
FIGURE 20. Machine Orientation After Tilt Calibration
6. Turn the machine around 180° and park with the machine facing the opposite direction and the rear axle in
between the markers.
To Next Page
Loading...