Raymarine E70533 - Putting the Radar into Standby

1.Ensureyourradarscanneriscompatible
,checkthelatestdetails
availableontheRaymarinewebsite,ifindoubtpleasecontactan
authorizedRaymarinedealerforadvice.
2.Ensureyouhaveinstalledyourradarscannerinaccordancewiththe
documentationthatwassuppliedwithyourRadar.
TheRadarappwillopeninoneofthefollowingstates:
Off/NotConnected
Ifthe‘Off/NotConnected’messageisdisplayedthenthedisplaycannot
establishaconnectionwithyourradarscanner:
Ensurethatyourdisplayandradarscannerarepairedcorrectlyandthen
select[On]topowerupyourradar .
Ifthe‘Radarnotfound’messageisdisplayedthenpowercycleyour
systemandperformthepairingprocedureagain.Iftheradarscannerstill
cannotbefoundrefertoyourRadar’sinstallationdocumentationforfurther
troubleshootinginformation.
Off
Ifthe‘Off’messageisdisplayedthenyourradarscannerispoweredoff ,
select[On]topowerupyourRadar
Standby(Nottransmitting)
Ifthe‘Standby’messageisdisplayedthenselect[Transmit]tobegin
transmitting.
Transmitting
Ifyourradarscannerisconnected,poweredupandtransmittingthenthe
radarimageisdisplayedandechoesreturnsaredisplayedonscreen.
Puttingtheradarintostandby
Withyourselectedradardisplayedonscreen:
1.Select[Transmit]fromthemainmenu.
Theradarscannerwillstoptransmittingandisputintostandbymode.
120