Raymarine E70533 - Following a Route

Adjustingthewaypointarrivalalarm
Thewaypointarrivalalarmisenabledbydefault.Thewaypointarrivalalarm
createsavirtualcircle
,ofthespecifiedradius,aroundthedestinationpoint.
Whenyourvesselreachesthevirtualcirclethealarmistriggered.
Fromthehomescreen:
1.Select[Settings].
2.Selectthe[Alarms]tab.
3.Selectthe[Arrivalradius:]settingfield.
4.Adjustthedistancetothedesiredvalue.
5.Pressthe[Back]buttontoreturntothealarmsmenu.
Note:
Thewaypointarrivalalarmcanbedisabledorenabledusingthe[W aypoint
arrival:]toggleswitch.
R estartingcrosstrackerror(XTE)
Acrosstrackerror(XTE)occurswhenyouractualroutedivergesfromyour
originalplannedroute.RestartingXTEplotsanewcoursedirectlyfrom
yourcurrentpositiontoyourdestination,ratherthancontinuingtofollow
theoriginalplannedroute.
1.Select[RestartXTE]fromthe[Navigation]menu:[Menu>Navigation
>RestartXTE].
FollowingaRoute
Followthestepsbelowtonavigateasavedroute.
FromtheChartapp,withtheroutedisplayedonscreen:
1.Selectarouteleg.
Theroutecontextmenuisdisplayed.
2.Select[Followroute]tofollowtheroutefromstarttofinish.
AlternativelyyoucanselectFollowroutefromtheroutepop-overmenu,
accessedfromtheRoutesmenu.[Menu>Routes&Tracks>Routes><Route
name>>Follow].
Formoreinformationonroutesandroutemanagementreferto:6.2Routes
Followingaroutefromaspecifiedwaypoint
Y oucanstartfollowingaroutefromanywaypointinthatroute.
FromtheChartapp,withtheroutedisplayedonscreen:
1.Selectthewaypointthatyouwanttostartfollowingyourroutefrom.
Theroutecontextmenuisdisplayed.
2.Select[moreoptions]
3.Select[Followfromhere].
78