Raymarine E70533 - Vessel Details; Viewing Object Information

•[Center]—Centeristhedefaultboatpositionandplacesthevesselicon
inthecenterofthescreen.
•[P
artialoffset]—Partialoffsetpositionsthevesseliconhalfwaybetween
thecenterandthebottomofthescreen.
•[Fulloffset]—Fulloffsetpositionsthevesselicontowardthebottomofthe
screenprovidingthegreatestviewahead.
Vesseldetails
TheVesseldetailspop-overprovidesaccesstovessel-relatedsettings.
FromtheV esseldetailspop-overyoucan:
•start/stopatrack.
•offsetthepositionoftheboatsymbol.
•changethesymbolusedtorepresentyourvessel.
•show/hideHeadingvector.
•show/hideCOGvector.
•changevectorstodisplayinfinitelengthvectorsorreferenceperiod
lengthvectors.
•show/hideTidegraphics
•show/hideWindgraphics
•setthelengthofreferenceperiodsforvectors.
Note:
WhentheChartmodeissettosimpletheavailableoptionsarereduced.
Viewingobjectinformation
Chartedobjectsthatareavailablewithyourcartographycanbeselected,
andobjectinformationviewed.
Whenyouselectanobject,thecursorwillchangetotheObject
cursor.
1.Pressthe[OK]buttontodisplaytheobjectcontextmenu.
2.Select[Chartinfo].
Alistofnearbyobjectsisdisplayed.
3.Scrollthroughthelisttodisplaydetailedinformationfortherequired
object.
Chartapp
69