Raymarine E70533 - Waypoint Sharing

Bydefaultyourvessel’
scoordinateswillbedisplayed.
6.Select[Save]toreturntothewaypointdetails.
7.Pressthe[Back]buttontoreturntotheWaypointgroupsmenu.
Findingnearbywaypoints
Y oucanfindwaypointsthatarewithintheLiveViewpanebyfollowingthe
stepsbelow.
Thewaypointfindfeaturewillfindandcreatealistofallwaypointslocated
withintheareacoveredbytheLiveViewpane.
Fromthehomescreen:
1.Select[Waypoints].
2.Tofindwaypointsthatarelocatedwithintheareacoveredbythe
LiveViewpane,select[Findwaypointsinthisarea],otherwise
3.Highlightawaypointinthewaypointlistandselect[Findwaypointsin
thisarea].
Alistofallthefoundwaypointswillbeshowninthewaypointlist.
PanningtheLiveViewarea
Y oucanchangethechartareadisplayedintheLiveView.
1.Openthe[Waypoints]menu.
ThewaypointsmenucanbeaccessedfromtheHomescreen
([Homescreen>Waypoints])andfromtheChartapp([Chartapp>Menu>
Waypoints]).
2.Pressthe[Right]button.
[Findwaypointsinthisarea]willbehighlighted.
3.Pressthe[Up]button.
FocuswillmovetotheLiveViewpane.
4.Pressthe[OK]button.
TheLiveViewpanewillenterpanningmode.
5.Usethe[Directionalpad]topanthechartareatothedesiredlocation.
6.Pressthe[Back]button.
7.Select[Findwaypointsinthisarea].
Showingandhidingwaypointgroups
WhenthewaypointmenuisaccessedfromtheChartappyoucanhideand
showwaypoints.
FromtheChartapp:
1.Pressthe[Menu]button.
2.Select[Waypoints].
3.Select[Show/hide].
Thelistofwaypointgroupsisdisplayed,allwaypointgroupsareselected
(ticked)bydefault.
4.Deselectanygroupsthatyoudonotwanttochange.
Y oucanalsousethe[Showall]and[Hideall]optionsifyouwanttoshow
orhideallofyourwaypoints.
5.Pressthe[Back]buttontoreturntothewaypointsmenu.
Note:
The[Show/hide]optionsisnotavailablewhenaccessingthewaypoint
menuformthehomescreen.
Waypointsharing
AnElement™displaywillsharewaypointswithasecondElement™display
connectedtothesameSeaTalkng®/NMEA2000network.
Note:
•Morethan2Element™displayscannotbeconnectedtothesame
network.
•Routesandtracksarenotshared.Ifarouteiscreatedondisplay1only
theroute’swaypointswillbesharedwithdisplay2.
Thefollowingwaypointfunctionswillbesynchronizedbetweendisplays:
•Creatingindividualwaypoints
•Deletingwaypoints
•Editingwaypointdetails
•Movingwaypointlocation
•Creatinganemptywaypointgroup
•Addingindividualwaypointstoagroup
ThefollowingwaypointfunctionswillNO
Tbesynchronizedbetweendisplays:
56