Raymarine E70533 - AIS Vectors; AIS Targets List

ThedangeroustargetalarmcanbeconfiguredfromtheDangeroustarget
page
,accessedfromthealarmsmenu:[Homescreen>Settings>Alarms>
DangerousAIStargets>Configure].
T osetuptheAISdangeroustargetalarm,firstadjustthe[Safedistance]to
thedesiredvalueandthenselecta[Timetoreachsafedistance].Thealarm
willbetriggeredifatrackedtargetwillreachthespecifiedSafedistancefrom
yourvesselwithinthetimeperiodselected.
Y oucandisplayaSafedistanceringaroundyourvesselintheChartappand
Radarappbyenabling[Showsafedistance].
AISvectors
VectorscanbedisplayedforAIStargets.
AIStargetvectorssettingscanbeaccessedfromthe[TargetSettings]tab:
[Menu>AIST argets>TargetSettings].
Thelengthofthevectorindicatesthepredictedpositionofthetargetafter
thetimeintervalspecifiedin[Vectorsperiod]haspassed.Adjustingthe
[Vectorsperiod]optionwilladjustthelengthofthevector.
AISvectorscanbeenabledanddisabledusingthe[AISvectors]toggle
switch.
Targetvectorscanbeenabledanddisabledforindividualtargets:Pressand
holdonanAIStargettodisplaythecontextmenu,andthenselect[Vector].
Thevectorscanbesetto[True]or[Relative].
T
ruevectors
Intruemodethevectorsareshownground
referenced(i.e.:theiractualpathover
ground).
Relativevectors
Inrelativemodethevectorsareshown
relativetoyourvessel’sposition.
AIStargetslist
TrackedAIStargetsarelistedintheAIStargetslist.
TheAIStargetslistcanbeaccessedfromtheRadarappmenu:[Menu>
AISTargets].
WhenanAIStargetishighlightedinthelisttheselectedAIStargetwillalso
behighlightintheLiveViewpane.
124