1.Usingadrillanda4mm(5/32)drillbit,drilloutthe4mountingholes.
Holesshouldbedrilledfromthefrontoftheunit,takingcarenottodamagetheunitbyapplying
toomuchforcetothedrill.
P
anelmounting
TopanelmounttheRadiofollowthestepsbelow.
Beforemountingtheproduct,ensurethatyouhave:
•Selectedasuitablelocation,ensuringthereisnothingbehindthemountingsurfacethatmay
bedamagedwhendrilling/cutting.
•Identifiedthecableconnectionsandroutethatthecableswilltake.
•Drilledoutthemountingholesontheunit.
•Removedthefrontbezel.
Installation61