Chapter 1: Operation 3
Selecting pages
To see the information you want, refer to the
Chapter selection and content
diagram above, to determine the location of the information you need (i.e. which
chapter and page), then:
1. Press the button the necessary number of times, to select the required
chapter. If the chapter title facility is enabled during User calibration, the
name of each chapter is briefly displayed when it is first selected.
Note:
Although most chapter names are displayed in full, the Environment chapter is ab-
breviated to
ENVIRONS
and the Autopilot chapter is abbreviated to
PILOT
.
2. With the appropriate chapter selected, use the button to select the
required page.
The manner in which information is accessed is shown in the following illustration
This shows (as an example) how to display true wind speed information.
Display types
The ST60+ Graphic Display pages show either 1, 2, 3 or 4 data elements in
alphanumeric form. In addition, single-element pages can also show graphic
information, such as a rolling road and graphs.
Selecting chapter Selecting page
How to select a page
D6432-1
or wait for
2 second
time out
Either press
PILOT
DEPTH
SPEED
WIND
81268_3.book Page 3 Tuesday, August 1, 2006 8:05 AM
To Next Page
Loading...
