10 ST60+ Graphic Display Owner’s Handbook
Favorite pages. You cannot include the rolling road or graphs on multi-ele-
ment pages.
Setting up Favorite pages
As there are seven Favorite pages, you may like to use these to display data from
each of the other chapters. So for example, on Favorite page 1, you could show
selected data from the Depth chapter, Favorite page 2 could show selected Speed
data, and so on.
To setup the data you want on each Favorite page:
1. With the FAVORITE chapter displayed, select the page you want to set up.
2. Hold down the
track and reset buttons for approximately 2 seconds, to
enter the Favorite page setup mode.
3. Use the
reset button to show the format you want, i.e. single element, dual
element, triple element or quad element. One element is highlighted (white
text on a black background), to show that is selected for adjustment.
4. If you have chosen a multi-element page, use the
track button to move the
highlight to the page element you want to set up.
5. Use the button to cycle to the data you want.
6. If you want to set up another element on this page, repeat steps 4 and 5.
7. Hold down the
track and reset buttons for approximately 2 seconds, to
leave the Favorite page setup mode.
8. Repeat the above procedure for all Favorite pages you want to set up.
Refer to the
User calibration
procedure in
Chapter 4, Calibration
, for details of
how to set up:
• How many Favorite pages are made available.
• Whether Favorite pages roll around automatically in sequence, or you manu-
ally select individual pages.
Single-element Favorite page
Can be set to show any other
page, including rolling road and
graphs
Each element can be set to show
any available data, except rolling
road and graphs
Typical multi-element Favorite page
D6480-1
81268_3.book Page 10 Tuesday, August 1, 2006 8:05 AM
To Next Page
Loading...
