REDCAT TEAL 2 - Post-Flight; Flight Logs; Download Flight Logs: Teal 2  Tac

38
POST-FLIGHT
Be sure to inspect the Teal 2 for any damage after
landing. It is recommended to power off and remove
the battery packs from both the drone and TAC before
stowing the system.
However, be sure to extract the flight logs from the
drone before powering it off. Flight logs can be
extracted at a later time, until they are permanently
deleted from the drone. Once the flight logs are
transferred from the drone to local storage on the TAC,
they can then be transferred to either a removeable
USB-C device or to a PC via USB-C cable.
Photos can be easily transferred from the drone if the
SD card was inserted and used during flight. Remove
the SD card from the drone and insert it into the SD
adapter, if necessary, and then be insert the adapter or
card into a PC. If photos were enabled on the TAC, the
photos will also be stored locally to the TAC and then
can be transferred to either a removeable USB-C device
or to a PC via USB-C cable.
FLIGHT LOGS
Some suggestions of what to document in your paper
or digital flight log:
• Date & time
• Environmental conditions
• Teal 2 serial number
• TAC serial number
• Software versions used
• Mission objective and operations performed
• The RPIC
• Damage sustained and/or maintenance
needed
DOWNLOAD FLIGHT LOGS: TEAL 2  TAC
To download flight logs over the drone wireless
network to the TAC, ensure Teal QGC is launched on
the TAC.
Touch the MENU icon at the top of the
TAC screen.
Select ANALYZE.
• A LOG DOWNLOAD screen will appear.
Select REFRESH at the right of the screen to ensure all
available files are displayed on the screen.
Select the file that you want to download by tapping
on the screen on that file. Files are distinguished by
time, date, and file size.
NOTE: Although the software will allow
multiple files to be selected, it is
recommended to download one file at a
time to avoid any timeout errors.
Select DOWNLOAD at the right of the screen.
• A screen will pop up prompting you to save the
file to a directory; this is not necessary and will
disappear after selecting OK.
Select OK to continue.
Once the file is finished downloading, the file’s status
on the screen will show as DOWNLOADED and will be
available to transfer off of the TAC.