40
After transferring the files onto the PC, you will need to
put the TAC back into kiosk mode. This is for both
security and functional reasons while in the field.
Disconnect the USB cable from the TAC.
Access the vertical side-bar menu.
Touch the TEAL TAC SETTINGS icon.
Switch the ACTIVE NETWORK to WIFI.
Access the vertical side-bar menu once more.
Select the gray gear SETTINGS icon.
Scroll to the bottom of the menu.
Select ABOUT TABLET.
Select SOFTWARE INFORMATION.
Select KNOX CONFIGURE.
Select APPLY LATEST PROFILE.
• You may see the screen rotate 90 degrees and
go through a status update.
• This will take only a few seconds, and once
completed, the TAC will be back in kiosk mode.
SWITCH ACTIVE NETWORK BACK TO DRONE
To resume flying missions, access the vertical side-bar
menu.
Touch the TEAL TAC SETTINGS icon.
Switch the ACTIVE NETWORK to DRONE.
TRANSFER MEDIA: SD CARD DRONE PC
If the SD card was inserted into the drone before flight,
the photos and videos will be saved to the SD card. The
files can be transferred directly to a PC.
Remove the SD card from the drone.
Insert the SD card into the SanDisk SD adapter that was
provided in the spares kit, if needed.
• Any SD adapter will suffice.
Insert the SD adapter or SD card into the PC.
On your computer, open a file browser such as
EXPLORER.
Find and follow the file path to the logs.
• The video will have a .ts file extension
• The photos will have a .jpg file extension and
will be labeled IMG.
• Each photo and video file will be labeled with
either EO or IR.
Move or copy the log files from the directory above to
the desired location on the PC.
To Next Page
Loading...