REDCAT TEAL 2 - Pre-Flight Checklist

27
PRE-FLIGHT CHECKLIST
An automated pre-flight checklist in FLY TOOLS can be
used to run through standard checks to ensure that the
vehicle is configured correctly and is safe to fly. Enable
the tool by navigating to APPLICATION SETTINGS >
GENERAL > FLY VIEW and select the USE PREFLIGHT
CHECKLIST checkbox. The tool will then be added to the
Flight Tools box. Touch the checklist icon from the Fly
screen to open the checklist.
OPERATIONS CHECKLIST
Check air space for restrictions and obtain
authorization as required by the appropriate
authorities having jurisdiction and follow all FAA,
federal, and local rules and regulations. Verify the
airframe and each payload, propulsion, and battery
system is air-worthy and not damaged.
1-PRE-MISSON
Air Space
Restrictions
Checked, in compliance
Applicable
Authorizations
Obtained
Weather
No limitations exceeded
Maps
Uploaded to TAC
Battery Packs
Charged
Mission Plans
Uploaded to TAC
Field Repair Kit
As required
GE/TAC Initial
Pairing
Complete
TAC User
Preferences
Set
2-PRE-FLIGHT
Wind
Up to 18 mph/
25 mph gusts
Temperature
Range
0 °F to 110 °F
(-17 °C to 43 °C)
Direct Sunlight
Limit until use
Launch Point
Clear of debris, 10 ft radius,
unobstructed
3-PHYSICAL INSPECTION
Arms
Intact at seam, secured into
place
Propellers
No bending, warping, chips, or
cracks found
Clear of interference from
accessories
Fasteners
No screws missing from airframe
Camera
Clear of debris, unblocked
Motors
Spin freely, no significant
resistance, all springs present
Gimbal
Protective Cover
Removed
Battery Packs
Fully charged
Antenna
Clear of interference from
accessories
SD Card
Inserted (optional)
4-SYSTEM POWER / PAIRING
Teal 2
Powered on
TAC
Powered on
Teal QGC App
Loaded, main screen displayed in
TAC
GE/TAC Comms
Link
Established
*GPS
Acquired (8 minimum, 10
recommended)
Calibration
If needed, complete
*Channel/
Frequency
Deconflicted
* Denotes Impact of Safety of Flight