106
5.2 Turning on the machine
Staged plans have been drawn up for turning the machine off and on. The plans include all the
actions that have to be performed for turning the machine on. The machine has 2 operational
modes:
- Automatic operation. The machine repeats the packaging process continuously and
stops when a set number of strokes have been performed or the process is terminated
manually.
- Manual film infeed. This mode is used when a new roll of bottom or top film is being put
in position. In this mode only the chain transport is active.
The staged plans are divided up according to step number, description of action and remarks.
The remarks note the consequences of an action or the relevant safety recommendations.
Never leave the machine unattended when turned on.
To Next Page
Loading...