Repak RE20 - Technical Specifications

9
1.4 Technical specifications
The specifications dealt with in this manual are limited to the activities permitted at operator
level. Extensive technical information, such as electrical and pneumatic diagrams, can be
found in Part 2 of the manual. Some operational characteristics of the machine are given in
Table 1.
Table 1 Operational characteristics
Electrical connection values and immediate environmental requirements
Value
Remarks
Current
3* 230/400 V 50-60Hz
3*230V 60HZ (USA,CA)
Phase
3Ph N PE
3 Ph PE (USA,CA)
Power
~15 kW*
Nominal current
35 A (35 A fuses)*
Noise level
70 dB
Minimum
Maximum
Water
0.5 bar
3 bar
⅜ “, 60 liters/hr
(20 Gallons/hour)
Pressed air (dry)
6 bar
7 bar
90PSI, 35 CFM
Gas
4 bar
6 bar
Relative humidity
-
70%
System characteristics
Dimensions (l x w x h)
RE20: 4000-5000-6000 x 1050 x 1950 mm.
Weight
ca. 2200-2600 kg (incl. Vacuum pump)
Film unwind unit
single-sided suspension, passive braking
Conveyor belt
drum motor, max. 1.2 m/s
Free loading area
RE20: ~800-1800 mm
Working height
950-1040 mm
Film width
320-420-460 mm
Max. stroke length
600 mm
Max. packaging height
120 mm
(*) depending on machinery configuration.