Repak RE20 - Procedure 2: Cleaning and Maintenance Steps

125
Procedure 2: Cleaning and maintenance
Tools required:
 soft sponge
 warm running water
 cleansers
 skin protection against cleansers
 compressed air
 waste bin
 chain oil
 small brush
 screw driver
1. protective plates
2. side plates
3. bottom film infeed roller
4. product support bars
5. support tray
6. longitudinal cutter
7. crosswise cutting
Figure 6.3 RE20
1.
1.
2.
3.
4.
4.
5.
6.
7.
Transport chain
Chain clips